How to access Safe Mode in Windows 10

How to access Safe Mode in Windows 10

How to access Safe Mode in Windows 10. In previous generation Windows 8, pressing the F8 key while booting displayed a menu that allowed you to access various Windows modes, such as Safe Mode. This changed in Windows 8 onwards. In this article, we are going to teach you how to access Safe Mode in Windows 10 in the form of Windows application tutorials.


Cheap VPS Hosting with Bitcoin, Perfect Money


Safe Mode is a mode in Windows that is used during Windows problems or for manually scanning for viruses. When Windows is booted in Safe Mode, only the essential Windows services are started and no drivers, software, viruses, etc. are started in this mode. Accordingly, this environment is called Safe Mode.

Follow us on how to access Safe Mode in Windows 10. Note that this tutorial also applies to the Windows virtual server.

Recommended Article: How to install WordPress on IIS web server

Access Safe Mode in Windows 10

1. After booting Windows 10 and before entering it, in the login window, click on Power.

2. After opening the menu, hold down the Shift key and then click on Restart.

Note: You can click on Power from the Start menu and click on Restart by holding down the Shift key.


How to access Safe Mode in Windows 10


3. In the window like the image below, click on Troubleshoot.


How to access Safe Mode in Windows 10


4. Select Advanced options.


How to access Safe Mode in Windows 10


5. In the Advanced Settings window, select the Startup Settings option so you can see the Windows boot settings before Windows starts up.


How to access Safe Mode in Windows 10


6. After going to the Startup settings, click on Restart to boot the system.


How to access Safe Mode in Windows 10


7. After booting the system, a menu like the one below will be displayed for you. You will be able to select any of the desired modes.

The selection must be relative to the number written next to the options and use the F1 to F9 key in the same way.

For example, in this step we press F4 to select Enable Safe Mode.


How to access Safe Mode in Windows 10


8. After selecting the desired option, Windows Safe Mode environment will boot.

Note that after finishing work in Safe Mode and rebooting the system, Windows will load normally.


Method 2: Go to Safe Mode in Windows 10 from the Settings section

1. First, go to Windows 10 settings.

To enter the settings section, you can click on the Start option and the settings section, which looks like a gear.

2. Click on Update & Security and then select the Recovery button.

3. From the Advanced Startup section, find Restart Now and click on it.

4. By selecting this option, your system will restart and after coming up again, a screen will appear that is blue.

There are several options on the blue screen. You can click on Startup Settings and then click on Restart.

5. After the system restarts, you will see several options.

You click on the fourth option (Enable Safe Mode). This will restart the system and go into safe mode.


Method 3: Press the f8 or shift + f8 key to enter Safe Mode in Windows 10

Some windows only have the Legacy BIOS. If your computer is one of those computers and is installed on the hard drive, you can use this method.

In fact, this method is one of the most common ways to enter safe mode.

To go to Safe Mode using this method, you must press the f8 key or the shift key + f8 when your computer is booting.


Method 4: Safe Mode when installing Windows 10

To enter Safe Mode in Windows 10, you can also proceed by installing Windows. To do this, follow the steps below:

1. Connect the desired memory (DVD or USB) to your system.

2. Boot the system as usual.

3. On the installation page, click on the NEXT option.

4. In the page that appears, click on Repair Your Computer.

5. Now follow these steps in order:

Troubleshoot>> advanced options>> Command Prompt.

6. When Command Prompt appears, type this command inside:

bcdedit / set {default} safeboot minimal

7. After performing these steps, close the Command Prompt.

8. Then select Continue and exit to boot the system in safe mode.


Exit safe mode in Windows 10

Above, we have taught you some ways to enter Safe Mode in Windows 10. Now we want to say what is it like to get out of safe mode in Windows 10?

To exit safe mode in Windows 10, you must do the following:

1. Use the Win + R key combination when your system comes up safely or in safe mode.

2. At this time, the run window is displayed. In the run window, type msconfig and press ok.

3. Go to the General tab and make sure Normal startup is turned on.

4. Select the boot tab. If Safe Boot is enabled in this tab, turn it off.

5. Now press the ok key.

6. Restart the system.

By performing the above steps, your system will exit the safe mode.

Recommended Article: How to access Safe Mode in Windows 10

Dear user, we hope you would enjoy this tutorial, you can ask questions about this training in the comments section, or to solve other problems in the field of Eldernode training, refer to the Ask page section and raise your problem in it as soon as possible. Make time for other users and experts to answer your questions.


How useful was this post?

Click on a star to rate it!

Average rating 1 / 5. Vote count: 1

No votes so far! Be the first to rate this post.

We Are Waiting for your valuable comments and you can be sure that it will be answered in the shortest possible time.

Leave a Reply

Your email address will not be published. Required fields are marked *

We are by your side every step of the way

Think about developing your online business; We will protect it compassionately

We are by your side every step of the way


7 days a week, 24 hours a day